RoughInSizing calculators for the trades

Solar calculators

Size an array from your electricity use, or find what a given array produces, using published sun hour data rather than a salesperson's estimate.

From output to payback

A solar estimate has four parts, and each one uses a different input. Work through them in this order.

  1. Output. The solar panel output calculator uses NREL peak sun hours for your state, and PVWatts-style loss defaults.
  2. Orientation. The tilt angle calculator works out the best tilt for your latitude, from solar geometry rather than a rule of thumb.
  3. Payback. The solar payback calculator uses the state's electricity rate from the EIA, a cost per watt, net metering and a yearly panel degradation figure.
  4. Storage. The battery runtime and bank size calculator applies depth of discharge by battery chemistry and Peukert's law.

What is not in the numbers

The federal residential credit for homeowner systems ended for installations after 31 December 2025, so the payback calculator defaults to no credit. Local incentives, roof shading and utility interconnection fees are not included. Treat the payback as a range, not a promise.

Other trades