Interiors calculators
Work out the materials for walls, ceilings and floors, with the manufacturers' coverage figures behind them.
Drywall calculator
Sheets of drywall for a room or a wall area, with screws, joint compound and tape.
Paint calculator
Gallons of paint and primer for a room or wall area, by coats and the coverage on the can.
Flooring calculator
Flooring to order with waste and boxes, or carpet in linear feet and square yards off a 12 ft roll.
Insulation calculator
How much attic insulation to add for your climate zone, in R-value and depth, by ENERGY STAR's recommendations.
Spray foam calculator
Board feet, how many kits you actually need after the manufacturer's derate, and the R-value from the published evaluation reports.
Tile calculator
Tiles and boxes for a floor or wall, with grout by joint size and thinset by trowel.
Grout calculator
Pounds and bags of grout for any tile and joint, from the coverage charts MAPEI, Custom and TEC publish for their grouts.
Ordering finishes
- Measure the real surfaces. Wall area is the room's perimeter times its height. Floors are length times width, broken into rectangles where the room is not one shape.
- Take out openings, add waste. Doors and windows come off. Add about 10% for cuts, and more for cut-up rooms and diagonal layouts.
- Buy one lot. Tile colour and drywall edges vary between production runs, so buy the whole job at once, with a little spare.
Which calculator
- Drywall for sheets, screws, mud and tape.
- Paint for gallons, using the coverage on the can.
- Flooring and tile for boxes and pieces, with waste. The grout calculator covers the joints.
- Insulation for attic R-value and depth by climate zone. Spray foam covers the foam volume for the area.
Coverage varies by product, so use the figure on the can or box. A rough surface, a dark colour over light paint, or a porous tile needs more than that figure, so add a margin for those.