Grout calculator
Enter the area, the tile and the joint width. You get how much grout to buy for the product you are using, worked from that maker’s own coverage chart, and the same job in every other grout for comparison.
Inputs
Result
The same job in every grout
Your area, tile and joint, with the same allowance. Figures marked * are off that maker’s chart and come from the formula fitted to it.
| Grout | Package | Covers, sq ft | You need | Joints |
|---|---|---|---|---|
| Typical cement grout, any brand | 25 lb | 488 | 1 × 10 lb | 1/16 in–3/4 in |
| Custom Polyblend / Polyblend Plus Sanded | 25 lb | 461 | 1 × 7 lb | 1/8 in–1/2 in |
| Custom Prism Ultimate Performance | 17 lb | 461 | 1 × 17 lb | 1/16 in–1/2 in |
| Custom Fusion Pro Single Component | 1 gal | 263 | 2 × 1 qt | 1/16 in–1/2 in |
| MAPEI Ultracolor Plus FA | 25 lb | 518 | 1 × 10 lb | 1/16 in–3/4 in |
| MAPEI Flexcolor CQ | 2 gal | 556 | 1 × 1 gal | 1/16 in–1/2 in |
| TEC Power Grout 550 | 25 lb | 486 | 1 × 7 lb | 1/16 in–1/2 in |
How much grout do I need?
Grout fills the joints, so what you need depends on the volume of the joints, not on the area of the floor alone. Small tiles have far more joint per square foot than large ones, wide joints more than narrow ones, and thick tile makes every joint deeper. That is why one bag can cover 50 sq ft of mosaic or 500 sq ft of large-format tile.
For 100 sq ft of 12 x 24 x 3/8 in tile with 1/8 in joints: (12 + 24) ÷ (12 × 24) × 0.125 × 0.375 × 144 = 0.844 cu in per sq ft, or 84.4 cu in in all. At 105 lb/ft³ that is 5.1 lb of grout, 5.6 lb with 10% extra: 1 × 10 lb.
How much grout per 100 sq ft
Pounds of a typical cement grout for 100 sq ft of tile, before the allowance for waste. Joints under 1/8 in take unsanded grout or a high-performance grout rated for them.
| Tile (in) | 1/16 in | 1/8 in | 3/16 in | 1/4 in | 3/8 in | 1/2 in |
|---|---|---|---|---|---|---|
| 1 x 1 mosaic x 1/4 in | 27.3 | 54.7 | 82.0 | 109.4 | 164.1 | 218.8 |
| 2 x 2 mosaic x 1/4 in | 13.7 | 27.3 | 41.0 | 54.7 | 82.0 | 109.4 |
| 3 x 6 subway x 1/4 in | 6.8 | 13.7 | 20.5 | 27.3 | 41.0 | 54.7 |
| 4-1/4 x 4-1/4 x 1/4 in | 6.4 | 12.9 | 19.3 | 25.7 | 38.6 | 51.5 |
| 6 x 6 x 1/4 in | 4.6 | 9.1 | 13.7 | 18.2 | 27.3 | 36.5 |
| 8 x 8 x 3/8 in | 5.1 | 10.3 | 15.4 | 20.5 | 30.8 | 41.0 |
| 12 x 12 x 3/8 in | 3.4 | 6.8 | 10.3 | 13.7 | 20.5 | 27.3 |
| 6 x 24 plank x 3/8 in | 4.3 | 8.5 | 12.8 | 17.1 | 25.6 | 34.2 |
| 12 x 24 x 3/8 in | 2.6 | 5.1 | 7.7 | 10.3 | 15.4 | 20.5 |
| 16 x 16 x 3/8 in | 2.6 | 5.1 | 7.7 | 10.3 | 15.4 | 20.5 |
| 18 x 18 x 3/8 in | 2.3 | 4.6 | 6.8 | 9.1 | 13.7 | 18.2 |
| 24 x 24 x 3/8 in | 1.7 | 3.4 | 5.1 | 6.8 | 10.3 | 13.7 |
| 6 x 36 plank x 3/8 in | 4.0 | 8.0 | 12.0 | 16.0 | 23.9 | 31.9 |
| 9 x 36 plank x 3/8 in | 2.8 | 5.7 | 8.5 | 11.4 | 17.1 | 22.8 |
| 12 x 48 x 3/8 in | 2.1 | 4.3 | 6.4 | 8.5 | 12.8 | 17.1 |
How far does a bag go? Coverage by brand
Square feet one package covers, for five common jobs. Each row is that maker’s own figure from its data sheet; a * marks a size the maker does not list, worked from the formula that reproduces the rest of its chart.
| Grout | Package | 12 x 24 1/8 in joint | 12 x 12 1/8 in joint | 6 x 6 3/16 in joint | 3 x 6 subway 1/16 in joint | 2 x 2 mosaic 1/8 in joint |
|---|---|---|---|---|---|---|
| Custom Polyblend / Polyblend Plus Sanded | 25 lb | 461 | 348 | 181 | 357* | 96 |
| Custom Prism Ultimate Performance | 17 lb | 461 | 348 | 181 | 356* | 96 |
| Custom Fusion Pro Single Component | 1 gal | 263 | 199 | 103 | 204* | 55 |
| MAPEI Ultracolor Plus FA | 25 lb | 518 | 388 | 194 | 392* | 97 |
| MAPEI Flexcolor CQ | 2 gal | 556 | 416 | 206 | 405* | 100 |
| TEC Power Grout 550 | 25 lb | 486 | 364 | 182* | 364 | 91* |
| Typical cement grout, any brand | 25 lb | 488 | 366 | 183 | 366 | 91 |
Tile thickness as in the first table: 1/4 in for the mosaics, subway and 6 x 6, 3/8 in for the rest. A 25 lb bag of Custom Polyblend and a 17 lb box of Prism cover the same area: Prism is a lightweight grout, and Custom publishes the identical chart for both.
Why the brands differ
Every maker’s chart works back to one number: how much joint a bag or a pail fills. For a powder that is the density of the mixed grout; for a pre-mix, how much of the pail ends up in the joints. Working it out from each published chart:
| Grout | Type | Packages | Joint width | Chart works out to | Formula vs chart, tile 4 in and up |
|---|---|---|---|---|---|
| Custom Polyblend / Polyblend Plus Sanded | Sanded cement | 25 lb / 7 lb | 1/8 to 1/2 in | 110 lb/ft³ | 2.4% |
| Custom Prism Ultimate Performance | Lightweight cement | 17 lb | 1/16 to 1/2 in | 75 lb/ft³ | 2.7% |
| Custom Fusion Pro Single Component | Pre-mixed | 1 gal / 1 qt | 1/16 to 1/2 in | 97% of the pail | 2.6% |
| MAPEI Ultracolor Plus FA | Rapid-setting cement | 25 lb / 10 lb | 1/16 to 3/4 in | 98 lb/ft³ | 2.0% |
| MAPEI Flexcolor CQ | Pre-mixed | 2 gal / 1 gal | 1/16 to 1/2 in | 99% of the pail | 3.5% |
| TEC Power Grout 550 | Hybrid cement | 25 lb / 10 lb / 7 lb | 1/16 to 1/2 in | 105 lb/ft³ | 0.3% |
The powders fall between 98 and 110 lb/ft³, which is why a typical figure of 105 works for any cement grout. Prism’s 75 is the lightweight filler at work. Both pre-mixes put about 97 to 99% of the pail into the joints, a gallon filling roughly 230 cu in. MAPEI and TEC follow the formula above; Custom’s charts allow for the joint around every tile, which adds noticeably more grout on mosaics with wide joints. The last column is the largest gap between the formula and any cell of that maker’s chart for tile 4 in and larger, which is how close an off-chart size comes out.
LATICRETE and Bostik
LATICRETE does not print coverage in its data sheets: the PERMACOLOR Select and SPECTRALOCK sheets say to see the packaging, and point to LATICRETE’s own calculator and app. Bostik does publish a chart for TruColor RapidCure, but it contradicts itself — it has a 4 x 4 x 5/16 in tile covering 191 sq ft per 9 lb pail at a 1/16 in joint and a slightly larger 4-1/4 in tile only 107 — so we have left it out rather than guess which row is right. For either, choose My own grout and type the coverage from the chart on your bag; the result then matches the maker exactly. Or use the typical cement grout, which lands within a few percent of every powder chart above.
Sanded, unsanded, pre-mixed or epoxy
- Sanded cement grout for joints of 1/8 in and wider. Custom’s Polyblend Sanded is rated 1/8 to 1/2 in.
- Unsanded for joints under 1/8 in and for tile the sand could scratch, such as polished stone and glass.
- High-performance cement grouts such as Ultracolor Plus FA, Prism and Power Grout cover 1/16 in to 1/2 in or more in one product.
- Pre-mixed grouts such as Flexcolor CQ and Fusion Pro are sold by the gallon; by the makers’ own charts a gallon covers about what 14 lb of their powder grout does.
- Epoxy grouts are sold in kits sized by volume; use the coverage on the kit with “My own grout”.
Questions
How much grout do I need?
It depends on the tile size, the joint width and the tile thickness. For 100 sq ft of 12 x 24 x 3/8 in tile with 1/8 in joints you need about 5.1 lb of cement grout, 5.6 lb with 10% extra. For 12 x 12 tile it is about 6.8 lb. Double the joint width and you roughly double the grout.
How much does a 25 lb bag of grout cover?
With 12 x 12 x 3/8 in tile and 1/8 in joints: 348 sq ft of Custom Polyblend Sanded, 388 sq ft of MAPEI Ultracolor Plus FA and 364 sq ft of TEC Power Grout, from each maker’s chart. With 12 x 24 tile and 3/16 in joints it is 310 to 345 sq ft. Mosaics take far more: about 50 sq ft of 1 x 1 tile at 1/8 in.
How much does a 10 lb bag of grout cover?
About 155 sq ft of 12 x 12 x 3/8 in tile at a 1/8 in joint for MAPEI Ultracolor Plus FA and 146 sq ft for TEC Power Grout, or 73 to 78 sq ft at a 1/4 in joint. Coverage scales with the bag weight.
How many square feet does a gallon of grout cover?
About 208 sq ft of 12 x 12 x 3/8 in tile at 1/8 in for MAPEI Flexcolor CQ and 199 sq ft for Custom Fusion Pro, by their charts. Pre-mixed grout is sold by volume, so a gallon covers roughly what 14 lb of the same maker’s powder does.
How much grout for 100 square feet?
About 5.6 lb for 12 x 24 tile with 1/8 in joints, including 10% extra, so one 10 lb bag. For 3 x 6 subway tile at 1/8 in it is about 15 lb, and for 2 x 2 mosaics several times that. The table above has every common size.
How much grout do I need for a backsplash?
A typical 30 sq ft backsplash of 3 x 6 x 1/4 in subway tile with 1/16 in joints takes about 2.3 lb with 10% extra. Grout for joints that narrow should be unsanded or a high-performance grout rated for 1/16 in, and a 10 lb bag is plenty.
How much grout do I need for a shower?
Add the tiled wall and floor areas. 100 sq ft of 3 x 6 subway tile on the walls at 1/8 in takes about 15 lb, and a floor of 2 x 2 mosaic takes several times more per square foot than the walls. Use a grout its maker rates for showers and other wet areas.
How much grout for 200 square feet of 12 x 24 tile?
About 15.4 lb with 3/16 in joints, 16.9 lb with 10% extra: 2 × 10 lb. With 1/8 in joints it is two-thirds of that.
Is there a LATICRETE grout calculator here?
LATICRETE prints its coverage on the bag and in its own app rather than in its data sheets, so this page has no LATICRETE chart. Choose “My own grout” and enter the coverage printed on your PERMACOLOR Select or SPECTRALOCK packaging for your tile and joint, or use the typical cement grout setting, which is within a few percent of the published charts.
How much does a 17 lb box of Prism grout cover?
The same as a 25 lb bag of Polyblend: about 348 sq ft of 12 x 12 x 3/8 in tile at 1/8 in, by Custom’s chart. Prism is a lightweight grout, so it fills the same volume with less weight.
Sources and method: TEC, MAPEI and Custom Building Products data sheets for the coverage charts. The full list, with the calculators that use each source, is on the sources page.
Sources
- TEC, MAPEI and Custom Building Products grout coverage charts. Manufacturers' data sheets.
More Interiors calculators
Drywall calculator
Sheets of drywall for a room or a wall area, with screws, joint compound and tape.
Paint calculator
Gallons of paint and primer for a room or wall area, by coats and the coverage on the can.
Flooring calculator
Flooring to order with waste and boxes, or carpet in linear feet and square yards off a 12 ft roll.
Insulation calculator
How much attic insulation to add for your climate zone, in R-value and depth, by ENERGY STAR's recommendations.
Spray foam calculator
Board feet, how many kits you actually need after the manufacturer's derate, and the R-value from the published evaluation reports.
Tile calculator
Tiles and boxes for a floor or wall, with grout by joint size and thinset by trowel.